Adjustable clutch lever

[kpmunt]

Anybody know of a replacement clutch lever that reduces the reach a bit?  On my 01 the reach is about to the max of my hand and borders on being uncomfortable.  Any ideas?

[blacktiger]

Take a look at the ones on a 08/09 Scrambler.

[walker]

scrambler / bonneville clutch levers won't fit (already tried that one!). The brake lever will though.

What I did - I just adjusted the lever so that it starts to engage about 1" from the grip - so to fully disengage it, you have to hold it against the grip... which I do anyway. At the end of the travel, there will be some "slop" - because the factory / official settings are free play at the other end.

Basically - I figure it like this - as long as when I squeeze the lever it's fully disengaged, and when I release it is fully engaged - and there is enough room to adjust using the adjuster at the lever - then, it's set correctly.

try setting it closer to the grip?

[Robbie]

this adds a bit to Walkers post
http://www.triumphrat.net/tiger-workshop/11448-clutch-lever-botch-job-long.html

slack lever works but still not held where it was needed

I am still running this setup

[walker]

nice find robbie! I never considered doing that!